Titanium Y-type filter is an indispensable device for the pipeline series conveying medium. It is usually installed at the inlet end of pressure reducing valve, pressure relief valve, fixed water level valve or other equipment to eliminate impurities in the medium and protect the valve. and normal use of the equipment. The filter has the characteristics of advanced structure, low resistance and convenient sewage discharge.
The applicable medium can be corrosive medium. The filter screen can be made according to user requirements, its appearance is basically the same (Y-type), and the inner parts are all made of titanium and titanium alloy, which is sturdy and durable. When cleaning is required, just take out the detachable filter cartridge, remove the filtered impurities, and then reload it, which is extremely convenient for use and maintenance. The filter is small in size, fine in filter eyes, small in resistance, high in effect, convenient in installation and maintenance, low in cost, and short in time for sewage discharge. For ordinary small models, it only takes 5-10 minutes.
Generally, the water distribution network is 18-30 mesh/cm2, the ventilation network is 40-100 mesh/cm2, and the oil distribution network is 100-300 mesh/cm2. Main technical parameters Shell material; titanium and titanium alloy, nickel and nickel alloy, nominal diameter 15 ~ 500mm filter frame filter material; titanium and titanium alloy, nickel and nickel alloy seal material oil-resistant asbestos, nitrile rubber, polytetrafluoroethylene Working temperature of vinyl fluoride (℃) -30~380 -80~425 -80~450 Nominal pressure (MPa) 1.6~10 (150Lb~600Lb) Filtration accuracy (mesh/in) 10~300
